During decoration, the mixing amount of gypsum powder wall surface should be configured in strict accordance with the required amount of plastering area, not too much or too little, and it should be used while mixing. The slurry of gypsum powder wall shall be used up before the initial setting, but the gypsum powder slurry that has been set for the first time does not need to be mixed with water for the second time.

石膏粉怎么調配

How to mix gypsum powder

1卿啡、硬度高的石膏粉調配方法：只需石膏粉和水吟吝，石膏粉與水的比例為100:28，將按比例調和即可颈娜。

1. Preparation method of gypsum powder with high hardness: only gypsum powder and water are needed. The ratio of gypsum powder to water is 100:28, which will be mixed according to the proportion.

2剑逃、先加入水，其次再加入石膏粉官辽，切記這點很重要蛹磺，若先加石膏粉在加水的話，是很難將兩者調配均勻的同仆，石膏的硬度與攪拌的均勻程度是成正比的萤捆，攪拌越均勻，牢度越高俗批。

2. First add water, then add gypsum powder. Remember this is very important. If you add gypsum powder before adding water, it is difficult to mix them evenly. The hardness of gypsum is proportional to the uniformity of mixing. The more uniform the mixing, the higher the fastness.

3长笋、凝固時間的掌握。凝固時間主要與加水量有關系浓蜈，次之與攪拌時間未然、澆鑄容器否胸、溫度、濕度有關系哮昧。水馆梦、石膏粉混合比，水越多石膏凝結時間越長仓貌，石膏密度越低桐继、牢度越低，水越少凝結時間越短泉互、密度越大蚤弃、牢度越高，具體需根據使用需求來控制严钞。

3. Control of setting time. The setting time is mainly related to the amount of water added, followed by the mixing time, casting container, temperature and humidity. Mixing ratio of water and gypsum powder: the more water, the longer the setting time of gypsum, the lower the density and fastness of gypsum, the less water, the shorter the setting time, the greater the density and the higher the fastness, which shall be controlled according to the use requirements.

4偿尘、乳白膠添加劑的石膏調配：乳白膠能增加石膏的牢固度，乳白膠的添加會使濟南石膏粉凝固時間延長点待，乳白膠用的越多凝固時間越長阔蛉，添加乳白膠(較多)凝固后石膏表面比較細膩的感覺，上色不容易被石膏吸收癞埠，顏料只會停在石膏表面状原。制作粗糙表面、需要石膏自然吸收顏料的時候要注意苗踪，是否添加乳白膠是會影響效果颠区。

4. Gypsum preparation of opal glue additive: Opal glue can increase the firmness of gypsum. The addition of opal glue will prolong the solidification time of Jinan gypsum powder. The more opal glue is used, the longer the solidification time. After adding (more) opal glue, the surface of gypsum is more delicate. The color is not easily absorbed by gypsum, and the pigment will only stop on the surface of gypsum. When making rough surfaces and requiring gypsum to naturally absorb pigments, attention should be paid to whether adding opal will affect the effect.

以上就是問題解答的相關內容了，希望能夠幫助到大家通铲，如對這一問題還存在任何疑問毕莱，都?xì)g迎關注我們網站http://www.bjtsdc.com并咨詢我們的工作人員，將竭誠為您服務颅夺。

The above is the relevant content of the question answer. I hope it can help you. If you still have any questions about this problem, you are welcome to follow our website http://www.bjtsdc.com And consult our staff, will serve you wholeheartedly.