Now some people unilaterally think that the bonding strength of putty of polymer mortar wall is faster, better, better, more elastic, better. In fact, this is not the case. After forming the strength of cement hydration, it is rigid and can not be flexible. The so-called elasticity is that it can not reach the normal cement strength and the sealing ability of high elastic material is strong. It can close or even completely seal porous cement, hinder cement hydration and prevent water. Self-maintenance (breathing) of mud under natural conditions is not conducive to the release of internal stress in cement.

　　聚合物灰泥砂漿抠刺，外墻膩子粘結強度高塔淤，就材料性能而言，水泥是無機水硬性膠結材料速妖，其粘結強度好高蜂，即使:4相比,水泥水泥磚塊、石頭,但前提條件是充分水化,由于水泥水化索王、凝結硬化是一個連續的過程,水泥的強度形成和穩定性是一個漸進的和相當長的過程,水化,凝結后,凝結硬化的結果取決于水泥和混凝土的水化程度通過使用自我維護的能力,自然條件,也就是說只要水泥水化條件好,良好的維護狀態,幾年后甚至可能經過10年的水泥強度會增加,將永遠不會ErSanTian可以實現理想或28天強度,水泥的強度是在水面上實現的,而不是添加膠改善力量,這是我們應該學習的經驗和教訓丢华。

　　Polymer mortar and putty of exterior wall have high bonding strength. As far as material performance is concerned, cement is an inorganic hydraulically cementing material. Its bonding strength is good. Even if: 4 compared with cement bricks and stones, the precondition is full hydration. Because cement hydration and setting hardening are a continuous process, the strength formation and stability of cement is a gradual and rather long process. After the first setting, the result of setting and hardening depends on the degree of hydration of cement and concrete by using self-maintenance ability, natural conditions, that is to say, as long as the cement hydration condition is good and the maintenance condition is good, the strength of cement may increase after 10 years, and ErSanTian will never achieve the ideal or 28-day strength. The strength of cement is realized on the water surface, but not on the water surface. It is adding glue to improve strength, which is the experience and lesson we should learn.

　　我們認為是聚合物水泥抹灰漿、主要原材料对番、外墻膩子和裂縫,主要是因為水泥水化后發生在干燥收縮的過程,所以我們更應該控制水泥材料特性和機理的基礎上,選擇水泥水化,節約用水,減少和控制水泥強度和混凝土的干燥收縮力量可以形成功能高分子產品,這是目前主要的裂縫码署，主要的技術解決方案蒙敦。

　　We believe that polymer cement mortar, main raw materials, external wall putty and cracks are mainly due to the drying shrinkage process of cement after hydration, so we should control the characteristics and mechanism of cement materials, choose cement hydration, save water, reduce and control the strength of cement and the drying shrinkage force of concrete to form functional polymer products. This is the current situation. The main cracks, the main technical solutions.

　　其他方面，在基層問題上朝财，應注意基層強度的平整度屏烂、材料的差異性以及裂縫的預處理等，在施工方法上應注意的是龟栗，不應敷太厚巾割，如需敷太厚，應分兩次或多次焰醇。

　　Otherwise, in the grass-roots problem, attention should be paid to the uniformity of the strength of the grass-roots, the difference of materials and the pre-treatment of cracks. In the construction method, attention should be paid to that the thickness should not be too thick. If the thickness is too thick, it should be divided into two or more times.

　　生產設備昧甲。有許多類型的生產設備,和選型很重要,從很多方面,如面積、能耗器谦、設備投資金額弯囊、生產效率,安裝、維護成本,方便操作和維護,工人的勞動強度,混合均勻,粉塵排放,噪音,設備耐用胶果、經濟和實用性。

　　Production equipment. There are many types of production equipment, and selection is very important, from many aspects, such as area, energy consumption, equipment investment amount, production efficiency, installation and maintenance costs, easy operation and maintenance, labor intensity of workers, uniform mixing, dust emission, noise, equipment durability, economy and practicability.

　　聚合物砂漿墻膩子開裂斤斧、裂縫的關鍵技術,是完全理解水泥材料的性質,在水泥水化的選擇的基礎上,能夠可持續水和水泥的自我維護,減少水泥干燥收縮力,改善水泥后期強度的穩定性和功能高分子產品,可以有效地從根本上解決裂紋的問題,裂縫早抠。

　　The key technology of putty cracking and cracking in polymer mortar wall is to fully understand the properties of cement materials. On the basis of the choice of cement hydration, it can sustain self-maintenance of water and cement, reduce drying shrinkage of cement, improve the stability of late strength of cement and functional polymer products. It can effectively fundamentally solve the problem of cracking and cracking.